User Guide w.v ww m co ni.
Summary 1. PRODUCT OVERVIEW 1.1 description 1.2 set up of arms 1.3 PACKAGING COMPOSITION 2. EDGE RF FEATURES 2.1 GENERAL SPECIFICATIONS 2.2 TECHNICAL SPECIFICATION 3. REQUIREMENTS 3.3 ACTIVHUBTM RF50 OVERVIEW 3.4 GENERAL SETUP 4. USING YOUR EDGETM RF 4.1 ON/OFF AND AUTO OFF 4.2 SWITCH BUTTON 4.3 BATTERY 4.3.1 BATTERY LEVEL 4.3.1 BATTERY CHARGE 5. SOFTWARE UPDATES 6. VOLFONI LOADER - PARAMETERS 7. TROUBLESHOOTING 8. IMPORTANT SAFETY RECOMMENDATIONS 9.
1. REQUIREMENTS 2. PRODUCT OVERVIEW To use your ActivEyes Pro in active 3D mode you need a 3D device playing 3D content on a 3D Display using compatible IR synchronization. Your 3D Glasses System by Volfoni includes one pair of ActivEyes Pro 3D glasses and one ActivMe Pro electronic receiver. Your ActivEyes Pro glasses, when connected to the ActivMe Pro, are compatible with most 3D TV sets using IR signals to control 3D glasses.
. QUICK START 6. UPDATE YOUR ACTIVEYES PRO To watch active displays using your ActivEyes System in universal infra-red 3D mode : 1. Using the connection cable, plug the ActivEyes Pro to the ActivMe Pro, and place the glasses on your head. 2. Check that the “function” selector on the ActivMe Pro is on “1”. 3. Switch the power on. The glasses should blink once each eye to signal that the system is up and running. 4. As soon as the IR or RF signal is identified and interpreted, the glasses go into 3D mode.
7. VOLFONI LOADER - PARAMETERS You can access to this part by clicking on “parameter” in the menu “edit” when your glasses are connected inscribed above the slider (0 in this example) Delta Sync (μs) : Modify the sync offset (between -2000 and 2000 microseconds). Default = 0.l 8.
9.
10. LED SIGNIFICANCE 9. WARRANTY - Flashing Green: Valid 3D signal detected - Red: Battery recharge - Flashing Green/Orange: Viewing 3D and recharging simultaneously Volfoni Group reserves the right to make changes in the hardware, packaging or other documentation without prior written notice. The ActivEyes Pro glasses are a trademark of Volfoni Group. All trademarks are the property of their respective companies. 10. IMPORTANT SAFETY RECOMMENDATIONS The EDGE™ VR are warrantied.
14. CAUTION MAINTENANCE OF YOUR GLASSES 11. MORE INFORMATION AND CONTACTS - Protect the 3D system from direct sunlight, heat, or water. Extreme conditions may alter the product’s abilities. - Do not drop or modify the electrical or mechanical components of the 3D system. - Do not apply force to the lenses of the 3D system. - Do not bend the product. - Use a clean soft cloth when cleaning the 3D glasses to avoid scratching, especially on the lens surface.
