User guide

10
11
9. TROUBLESHOOTING
PROBLEM SOLUTION
The jack plug may not
be all the way inserted
in the ActiveMe Pro or
in the glasses
Check the connection
jack
The IR signal is not
recognized
Check that your 3D
system
is emitting IR
The IR signal is obscured Make sure ActivMe
Pro is
facing the IR emitter
The IR signal is
scrambled by other
sources like direct
sunlight
Reduce external light
The ActivMe Pro battery
is discharged
Plug the USB cable
into a
power source and try
again
Your 3D display uses
an IR protocol not
compatible with
Activeyes Pro
Check www.volfoni.
com
for update
10. SPECIFICATIONS
ActivEyes Pro VPAE-02000 VPAE-01000
Lens technology ECB liquid
crystal
Hybrid ECB
Transmittance 35%
33%
Residual light 17%
16%
Contrast 200:1
200:1
Connector 4 points 2.5’’ jack
Weight 29g
ActivMe Pro (electronic driver) VPAE-03000
Receiver IR and RF
Connector µUSB and 4-points 2.5’’ jack
Power Battery type Lithium-ion
Operating time 30 hours
Operating
conditions
Operating 0° to 35° C
Storage -20° to 45° C
Relative
humidity
5% to 95%
Height 50 mm
Width 41mm
Depth 15mm
Weight 21 g