User guide

1110
9. RF COMPATIBILITY
Using your ActivEyes Pro in RF 3D mode :
ActivMe Pro is compatible with ActivHub RF50. It’s a
proprietary signal.
10. TROUBLESHOOTING
PROBLÈME SOLUTION
The jack plug may not be
all the way inserted in the
ActiveMe Pro or in the
glasses
Check the connection
jack
The IR signal is not
recognized
Check that your 3D
system is emitting IR
The IR signal is obscured Make sure ActivMe Pro
is facing the IR emitter
The IR signal is scrambled
by other sources like direct
sunlight
Reduce external light
The ActivMe Pro battery is
discharged
Plug the USB cable into
a power source and try
again
Your 3D display uses an IR
protocol not compatible
with Activeyes Pro
Check www.volfoni.
com for update
11. SPECIFICATIONS
ACTIVEYES PRO VPAE-02000 VPAE-01000
Lens technology ECB liquid crystal Hybrid ECB
Transmittance 35% 33%
Residual light 17% 16%
Contrast 200:1 200:1
Connector 4 points 2.5’’ jack
Weight 29g
ActivMe Pro (electronic driver) VPAE-03000
Receiver IR and RF
Connector μUSB and 4-points 2.5’’ jack
Power Battery type Lithium-ion
Operating time 30 hours
Operating conditions Operating 0° to 35° C
Storage -20° to 45° C
Relative humidity 5% to 95%
Height 50 mm
Width 41 mm
Depth 15 mm
Weight 21 g