User Manual

• WARNING: Always keep optional accessories, small parts and packaging out of the
reach of babies and small children, as these items may be a choking hazard.
• Servicing: Do not attempt to service this unit yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
• DO NOT overcharge your VolkanoX Anaconda Series Speaker, doing so will shorten
the lifespan of the built-in battery and could cause your device to overheat.
• CAUTION: Do not disassemble the battery or dispose of it in fire.
• CAUTION: Should your battery show signs of overheating, smoke or fumes being e
mitted during charging, remove the charging cable immediately.
• Prevent battery leakage from contacting your eyes, skin or clothing. Should this
happen, flush the area with clean water and see a doctor immediately.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH THE EUROPEAN DIRECTIVE ON WASTE ELECTRICAL AND
ELECTRONIC EQUIPMENT.
• At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection center
or to a dealer providing this service. Disposing of a household appliance separately
avoids possible negative consequences for the environment and health deriving from
inappropriate disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources. As a reminder of the need to dispose of
household appliances separately, the product is marked with a crossed-out wheeled
dustbin.
* Never dispose of used electronics with ordinary solid wastes, since they
contain toxic substances.
* Always dispose of used electronics in accordance with the prevailing
community regulations that apply to the disposal of electronics. If there
are no local regulations concerning electronics disposal, please dispose of
the device in a waste bin for electronic devices.
1. Press Mode Button to cycle the speaker to Aux mode.
2. Plug the provided audio cable into the compatible device’s Aux input and then into
the Aux input of the speaker.
Note: In Bluetooth mode, inserting an Aux cable will disconnect the Bluetooth and
switch to playing from the Aux input. Press the Mode Button to switch back to
Bluetooth mode.
Aux-In
6 7 8 95
Cleaning & Caring Instruction - General
Environmentally Friendly Disposal
This VolkanoX Anaconda Series Bluetooth Speaker comes with a standard 12-month
limited warranty against manufacturing defects and faults. Should your VolkanoX
Anaconda Series be unboxed with any faulty parts, poor finishing or visible damage,
or fail to perform due to a manufacturing defect or poor workmanship, please return
it with your proof of purchase (till slip or invoice) to the store of purchase for an
exchange, or repair, depending on the store’s returns policy.
This warranty commences from the date of purchase.
Kindly retain your proof of purchase as well as the packaging for your warranty period.
Note: The Warranty does not apply to Product that:
1. Has failed due to excessive wear and tear beyond what is considered to
be reasonable.
2. Has been misused or neglected.
3. Has been damaged accidentally or by acts of God including fire and flooding.
4. Has been used or operated contrary to operating or maintenance instructions
outlined in this manual.
The Store of Purchase / Seller cannot accept any returned products that have not been
returned in accordance with this warranty or which does not follow their own Returns
Policy. Please refer to the Store of Purchase / Sellers Returns Policy for details.
Should you require any further assistance or have any questions on your warranty,
please contact the store of purchase.
Warranty
1. My smartphone cannot find any new Bluetooth devices?
a. Ensure the device has entered the pairing mode.
b. Ensure the device is within an effective working range.
2. Bluetooth device cannot pair up?
Ensure your mobile phone allows new connections and has not reached the
maximum number of allowed devices.
Troubleshooting
iPhone, iPad, and iPod Touch:
a) On your device, go to Settings.
b) Select Bluetooth. If Bluetooth is not on, turn it on.
c) The iPhone / iPad / iPod will automatically search for new devices.
Android Phones and Tablets:
a) On your device, go to the Settings Menu.
b) Select Bluetooth (on older Android devices Bluetooth is found in the Wireless and
Networks Menu). If Bluetooth is not on, turn it on.
c) Select “Search for Devices” if your phone or tablet does not automatically search for
new devices.
NOTE: If you are unsure on how to access your Bluetooth Menu on your device, please
refer to your device’s instruction manual.
LOCATING THE BLUETOOTH MENU
Safety Precaution
1. Use the provided audio cable as an antenna to receive a good FM radio signal.
2. Once the device has been turned on, press the Mode Button to cycle to FM radio
mode.
3. Press the Play / Pause and FM Auto Scan Button to search for all available FM
channels and store them automatically.
4. To navigate between radio stations, press the Next Track / Volume Up Button or
the Previous Track / Volume Down Buttons to select radio stations.
Note: Inserting the audio cable while the speaker is in FM mode, will cause the speaker
to automatically switch to Aux mode. Pressing the Mode Button again will cycle
back to FM mode.
FM Radio Mode
3. FM Radio
Function Operation
Increase Volume
Long press the Next Song / Next Station /
Volume Up Button
Decrease Volume
Long press the Previous Song / Previous Station /
Volume Down Button
Navigate up through
saved channels
Short press the Next Song / Next Station /
Volume Up Button
Navigate down through
saved channels
Short press the Previous Song / Previous Station /
Volume Down Button
Automatic Station Scan
Short press the Play / Pause and FM Auto Scan
Button
1. Switch the power on.
2. Insert USB flash disk into the slot. The music stored will be played automatically.
3. Press the Next Track / Volume Up Button to skip to the next song. Press the
Previous Track / Volume Down Button to play the previous song.
4. Press the Play / Pause and FM Auto Scan on the speaker to play or stop
music.
5. Press and hold the Next Track / Volume Up Button or the Previous Track
/ Volume Down Button to increase or decrease volume accordingly.
Note: In Bluetooth Mode, inserting a USB flash disk will disconnect the Bluetooth and
switch to playing from the USB flash disk. Press the Mode Button to switch back to
Bluetooth mode.
Playing MP3’s from a USB Flash Drive
• To reduce the risk of fire or electric shock, do not expose
this equipment to rain or moisture.
• To reduce the risk of fire or electric shock, keep this equip
ment away from all liquids. Use and store only in locations
which are not exposed to the risk of dripping or splashing
liquids, and do not place any liquid containers on top of the
equipment.
This product is not intended for commercial use and has been tested for household
use only.
• This product is not intended for use by small children, or persons with diminished
mental capabilities. Ensure that use of this product is monitored by a guardian
or parent.
• CAUTION: Do not remove the panel covers by unscrewing them. To reduce the risk of
electric shock, do not the remove cover. No user-serviceable parts inside. Refer
servicing to qualified service personnel.
• DO NOT use any accessories, plugs or power supplies not recommended by this
document, or of a lesser Amperage or Voltage.
• CAUTION: To reduce the risk of fire or electric shock and annoying interference, use
the recommended accessories only.
• CAUTION: In order to maintain adequate ventilation, do not install or place this unit
in a bookcase, built in cabinet or any other confined space. To prevent risk of electric
shock or fire hazard due to overheating, ensure that curtains and any other materials
do not obstruct the ventilation.
• CAUTION: Do not lift, move or otherwise transport the device by pulling on the
cables. Always lift your device by the Shoulder Strap and with a firm grip.
Safety Precaution
3. The device does not play music or answer calls when it is connected to a
Bluetooth mobile phone.
a. Ensure your mobile phone supports A2DP and HSF (Hands-Free) profiles.
b. Ensure your mobile phone is within an effective working range.
4. When paired with my computer, Windows asks for a new driver.
Can you supply this?
We recommend you find compatible drivers for your computer online.
5. Why can I not remotely control the Pause / Play / Previous / Next functions when
music is playing?
This feature needs the Bluetooth device paired with the speaker to support
AVRCP (Audio / Video Remote Control Profile). Please ensure your device
supports this.
• Before Cleaning: Ensure that your VolkanoX Anaconda Series Speaker is turned
off and not plugged into any Wall Charger / USB Charging Cable before cleaning or
maintaining your device.
• Cleaning: Wipe down the surface of your VolkanoX Anaconda Series Speaker using
a soft, slightly damp cloth.
• Do not use any harsh or abrasive cleaning chemicals or materials on your VolkanoX
Anaconda Series Speaker as doing so may damage or scratch the surface finish.
• Do not expose VolkanoX Anaconda Series Speaker to direct sunlight or high tem
peratures for extended periods of time.
• Do not store in temperatures over 60°C. Do not expose the battery to excessive heat
such as sunshine, fire or the like. Store in a cool, dry place.
• DO NOT submerge or expose your Anaconda Series Speaker or any parts, including
the cables, power supply or inner workings in or to water.
• DO NOT drag your VolkanoX Anaconda Series Speaker across the floor. Doing so may
damage the base of the unit or the surface you a pulling your device across.