User Manual

1. Press M Mode Button to cycle the speaker to Aux mode.

2. Plug the provided audio cable into the compatible device’s Aux input and then into

the Aux input of the speaker.

Aux-In

3. FM Radio

Function Operation

Increase Volume

Long press the / V+ Next Song / Next Station /

Volume Up Button

Decrease Volume

Long press the V– / Previous Song / Previous

Station / Volume Down Button

Navigate up through

saved channels

Short press the / V+ Next Song / Next Station /

Volume Up Button

Navigate down through

saved channels

Short press the V– / Previous Song / Previous

Station / Volume Down Button

Automatic Station Scan

Short press the Play / Pause and FM Auto Scan

Button

1. Switch the power on.

2. Insert USB ﬂash disk or SD card into the slot. The music stored will be played

automatically.

3. Music tracks can be selected either on the speaker or on your playback device

(smartphone, computer, tablet etc.). Press the / V+ Next Track / Volume Up

Button to skip to the next song. Press the V– / Previous Track / Volume Down

Button to play the previous song.

4. Volume can be controlled either on the speaker or on your playback device

(smartphone, computer, tablet etc.). Press and hold the / V+ Next Track /

Volume Up Button or the V– / Previous Track / Volume Down Button on the

speaker to adjust the volume as preferred.

5. Press the Play / Pause and FM Auto Scan Button to play or pause the music.

Note: In Bluetooth Mode, inserting a USB ﬂash disk will disconnect the Bluetooth and

switch to playing from the USB ﬂash disk. Press the M Mode Button to switch back to

Bluetooth mode.

Playing MP3’s from a USB Flash Drive or Micro SD Card