User Manual
INSTRUCTIONS FOR USE:
IDENTIFYING PARTS
CHARGING THE EARPHONES
SWITCHING ON THE EARPHONES
PAIRING WITH BLUETOOTH
®
DEVICES
INSTRUCTION MANUAL
Please read and retain these instructions for future reference.
• Bluetooth
®
:
Version: 4.2
Chip Set: BK
Profiles: HFP, HSP, A2DP, AVRCP
Range: 10 m
• Playback Time: 3 - 4 Hours
• Battery Capacity: 55 mAh
• Charge Time: 2 Hours
• Battery Type: Lithium Polymer
• Impedance: 32 Ω
• Sensitivity: 98 dB
• Driver: 10 mm
• Power Requirement: 5V DC , 1A
• Frequency Response: 20 Hz – 20 kHz
Connect the USB A end of the Charging Cable to a USB Charging Port and insert
the Micro USB end to the port on the Amplify earphones. Make sure it is properly
connected. The red Indicator Light will be lit while the earphones are charging and
will turn blue when the earphones are ready for use.
To turn the earphones on, hold the Multifunction Button for approximately
three seconds. The earphones will prompt with three beeps and the LED will start
flashing blue and red. To turn the earphones off, hold the Multifunction Button for
approximately three seconds.
• Volkano Moda Series Nylon Braided Bluetooth Earphones
• USB Charging Cable
• 3 x Earbud Cap Sizes
• Cable Length Adjuster
• Instruction Manual
• Hard Carry Case
• Hands-Free Calling
• True Stereo Sound
• Volume Controls
• Bluetooth
®
• Up to 4 Hours Playtime
PACKAGE CONTENTS
HIGHLIGHTS
SPECIFICATIONS
Android™ Phones and Tablets:
a) On your device, go to the Settings menu.
b) Select Bluetooth
®
(on older Android devices Bluetooth
®
is found in the Wireless
& Networks menu). If Bluetooth
®
is not on, turn it on.
c) Select “Search for Devices” if your phone or tablet does not automatically search for
new devices.
Once the earphones are turned on, they will automatically connect with the last
paired Bluetooth
®
device that is on and within range. If the earphones do not connect
automatically, open the Bluetooth
®
menu on your device and select “Moda” from the
Bluetooth
®
device list.
CONNECTING WITH PAIRED DEVICES
2 3 4 5
1. LED Indicator
2. Micro USB Charging Port
3. Multifunction Button
4. Next Track / Volume Up Button
5. Previous Track / Volume Down Button
1. Volume Controls
Function Operation Notes
Increase Volume
Long press the Next Track
/ Volume Up Button
When the volume reaches
the minimum or maximum
level, the earphones will
produce a short tone.
Decrease Volume
Long press the Previous
Track / Volume Down Button
2. Audio Controls
Function Operation
Play or Pause Track Short press the Multifunction Button
Next Track Short press the Next Track / Volume Up Button
Previous Track
Short press the Previous Track / Volume Down
Button
CONTROLS
Moda Series
NYLON
BRAIDED
BLUETOOTH
EARPHONES
®
VK-1107-BL
2
3
1
4
5
H
a
r
d
c
a
r
r
y
c
a
s
e
i
n
c
l
u
d
e
d
Your earphones must be paired to a Bluetooth
®
device before they can be used. It is
only necessary to pair your earphones once with each device. Please switch on your
earphones before pairing them to your device.
1. Open the Bluetooth
®
menu on the device you wish to pair (see “Locating the
Bluetooth
®
Menu” for more details). Some devices require you to select “Search for
Devices” or “Add New Device” in order to create a Bluetooth
®
pairing.
2. Wait until you see “Moda” on your device screen.
4. Select “Moda” on your device and follow any further prompts to pair. Once pairing
is complete and a connection is established, the earphones will sound with a short
beep to indicate a successful connection and the LED indicator will flash at a slower rate.
iPhone, iPad, and iPod Touch
a) On your device, go to Settings.
b) Select Bluetooth
®
. If Bluetooth
®
is not on, turn it on.
c) The iPhone / iPad / iPod will automatically search for new devices.
LOCATING THE BLUETOOTH
®
MENU