User Manual

To turn the earphones on, hold the

Multi-Function button for

approximately three seconds. The earphones will prompt Power on

and the LED will start ﬂashing blue. To turn the earphones off, hold

the

Multi-Function button for approximately three seconds.

Please note that your earphones must be paired to a Bluetooth

device before they can be used. It is only necessary to pair your

earphones once with each device.

1. Open the Bluetooth

menu on the device you wish to pair (see

“Locating the Bluetooth

Menu” for more details). Some devices

require you to select “Search for Devices” or “Add New Device” in

order to create a Bluetooth

pairing.

2. With the earphones turned off, hold the Multi-Function button

for approximately 3 seconds. The earphones will prompt Power

on. Press and hold the Multi-Function button for two seconds.

The LEDs will start ﬂashing blue and red while the earphones are

in pairing mode.

3. Wait until you see “Resonance” on your device screen.

4. Select “Resonance” on your device and follow any further

prompts to pair. Once pairing is complete and a connection is

established, the blue and red LED lights will ﬂash at a slower rate

and ﬁnally switch off. The earphones will then prompt

“connected to end audio”.

1. Adjusting The Volume

TURNING ON AND OFF

PAIRING WITH BLUETOOTH

DEVICES