User Manual

CHARGING
Please fully charge the Barrel Speaker before using it for the first time.
Connect the USB A end of the Charging Cable to a USB Charging Port and insert the Micro USB end
to the port on the Barrel. Make sure it is properly connected. The red indicator light will be lit while the
Barrel is charging. When the battery is full, the red indicator light will switch off automatically.
CONTROLS
CONTROLS
BLUETOOTH PAIRING
1. Switch the power on. The display screen will indicate “Hi” and a welcome tone will be audible.
2. Cycle to Bluetooth mode by pressing the MODE Button until the display screen indicates “bt”, the
speaker will beep twice. The Bluetooth symbol will flash, this means that the speaker is ready to
pair with your Bluetooth playback device.
3. Activate the Bluetooth on your playback device and search for “Rocket”. Select “Rocket” from the
device’s list to connect. You will hear a connection tone after the speaker has been paired
successfully and the Bluetooth LED will stop flashing.
4. You can now playback audio through the speaker.
5. Music tracks can be selected either on the speaker or on your playback device (smartphone,
computer, tablet etc.). Press the FM+ /
Button to skip to the next song. Press FM- / Button
to play the previous song.
6. Volume can be controlled either on the speaker or on your playback device (smartphone, computer,
tablet etc.). Press VOL+ or VOL- Button on the speaker to adjust the volume as preferred.
7. Press the AUTO SCAN
Button on the speaker to play or stop music.
Function Operation
Increase Volume Short press the VOL+ Button.
Decrease Volume Short press the VOL- Button.
Navigate to Next Track
Short press the FM+ /
Button.
Navigate to Previous Track
Short press the FM- /
Button.
Play or Pause Track
Short press the AUTO SCAN
Button.
To navigate between the USB, Micro SD, Bluetooth and Aux Modes short press the Mode button.