User Manual

CHARGING THE CASE
INSTRUCTIONS FOR USE
• Please ensure that the battery is fully charged before using the device for the
first time.
• Connect the provided USB charge cable to the DC 5V charging slot on the charging
case, connect the other end of the USB to a wall charger or an available USB port on
a compatible device.
• The Red LED Indicator Light will pulse to indicate that charging has begun.
• The LED Indicator will pulse repeatedly to indicate that the battery is flat.
Note: Once fully charged, the Red LED will display in a solid light.
4
CHARGING THE EARPHONES
• Please ensure that the battery is fully charged before using the device for the first time.
• Place the earphones into the charging case. A Red light will pulse when the charging
has begun. The Red Light will stay lit while charging and turn off when complete.
• When the earphones are removed from the charging case they will power on
automatically.
Note: The earphones will turn off when inserted into the charging case, even if they are
powered ON before charging.
SWITCHING ON THE EARPHONES
• To switch on the device, touch and hold the Multi-Function Touch Button for about
3 seconds until the Red LED lights turn on.
• To switch off the device, touch and hold the Multi-Function Touch Button for about
3 seconds until the LED lights turn on and then off, you will then hear a voice prompt
stating that the earphones have been powered off.
Note: Please note that the earphones would need to be turned on individually.