Instruction Manual

4
CHARGING THE CASE
• Please ensure that the battery is fully charged before using the device for
the first time.
• Connect the provided USB Charge Cable to the Micro USB charging slot on the
charging case, connect the other end of the USB to a wall charger or an available
USB port on a compatible device.
• The LED Indicator Light on the Charging Case will flash red while charging.
• When charging is complete, the LED Indicator Light will stop flashing and stay on.
INSTRUCTIONS FOR USE
CHARGING THE EARPHONES
• Please ensure that the battery is fully charged before using the device for
the first time.
• Place the earphones into the charging case, charging begins automatically.
Note:
• Charge time is approximately one to two hours. Earphones cannot be used
while charging.
• The earphones will turn off when inserted into the charging case, even if
they are powered ON before charging.
SWITCHING THE EARPHONES ON & OFF
• Switching the Earphones On: The earphones automatically switch on when removed
from the charging case.
• Switching the Earphones Off: The earphones automatically switch off when placed
back into the charging case and can also be switched off manually by pressing and
holding the Multi-function Button for about 4 seconds or until the LED light turns off.