Phonic Series BLUETOOTH ® WIRELESS HEADPHONES INSTRUCTION MANUAL Please read and retain these instructions for future reference. V1.
SPECIFICATIONS Bluetooth®: Version: 5.0 Chipset: JL 6925 Profiles: A2DP, AVRCP, HFP Range: 10 m Impedance: 64 Ω Frequency Range: 20 Hz – 20 kHz Sensitivity: 108 dB Battery: 400 mAh Li-Ion Driver Size: 40 mm Charging Time: 2.
IDENTIFYING PARTS 1. 2. 3. 4. 5. 6. 7. 8. 9.
INCLUDED IN THE BOX • • • • Volkano Phonic Bluetooth® Folding Headphones Instruction Manual USB to Micro USB Cable 3.5 mm Aux Line Input Cable CHARGING Please ensure that the battery is fully charged before using the device for the first time. • Connect the provided USB charger cable to the charging slot on the headset Connect the other end of the USB charger to a 5 V USB wall charger or available USB port on your computer. • The LED indicator light will display a red color when charging.
CONNECTING WITH PAIRED DEVICES • Switch on the headphones. • Press the M Mode Button to switch to Bluetooth® Mode. • The red and blue LED lights will flash, this means that the headphone is ready to pair with a Bluetooth® device. • Ensure that your device’s Bluetooth® is on. Search for the “Phonic”. When your phone finds the device, confirm pairing by selecting the device from the list. • When successfully paired, the blue LED light will flash slowly.
4. FM Mode Function Operation Enter FM Mode Press the M Mode Button to cycle to FM Mode Auto-Scan Long press the Fine Tune Press the + Volume Up / Forward Button to skip a station and continue searching, or - Volume Down / Backward to return to a station. Play Button to auto-scan stations Aux-In Mode • You do not have to switch the headphones “ON” for this mode.
SAFETY PRECAUTIONS • The product should only be used with the parts provided by the manufacturer. • This product is intended for indoor use only. • Never use your Phonic Series Headphones near water or in areas where it can come into contact with water. Never handle the Phonic Series Headphones if they have been dropped in water or any other liquid. If the product comes into contact with water while still plugged in, this is a safety hazard.
TROUBLESHOOTING 1. No Power Recharge your Phonic Series Headphones using the included Micro USB Cable. Try using a different Micro USB Cable. 2. Music is not playing over Bluetooth® Make sure your Bluetooth® device has A2DP profile. Check if both devices are paired and connected over Bluetooth®. Restart the Headphones to reconnect your Bluetooth® device. 3. Bluetooth® device will not reconnect with Headphones. Navigate to your Bluetooth® Settings Menu on your Bluetooth® device.
DISCLAIMER All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Volkano is under license.
