Repair Manual

7
4051 - 1 - 1
03C2T02168
Z
0300 035H
09G
1004
420
100
111
113
7
8
4051 - 1 - 1
03C2T02168
Z
0300 035H
09G
1004
Continued on Page 54
44. Remove the B1 clutch apply ring and return
spring assembly, as shown in Figure 71.
45. Remove the K3 clutch housing assembly, as
shown in Figure 71, and set aside for the
component rebuild section.
Note: Number 2 thrust washer may be stuck
to back of K3 clutch housing.
46. Remove the front planetary as an assembly, by
lifting assembly straight up using the input shaft,
as shown in Figure 72.
TRANSAXLE DISASSEMBLY (CONT'D)
53
Copyright © 2010 ATSGCopyright © 2010 ATSG
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
Figure 71 Figure 72
100 K3 CLUTCH HOUSING ASSEMBLY.
111 NUMBER 2 THRUST WASHER.
420 B1 CLUTCH APPLY RING AND RETURN SPRING ASSEMBLY.
113 FRONT PLANETARY ASSEMBLY.
WWW.ALL-TRANS.BY