Repair Manual

Continued on Page 56
50. Remove the B1 clutch pack from the B1 clutch
housing, as shown in Figure 75.
51. Remove the B1 clutch housing retaining snap
ring, as shown in Figure 76, and remove the
B1 clutch housing.
Note: This snap ring is identified by two small
"turn-outs" at snap ring ends, as shown in
Figure 76.
TRANSAXLE DISASSEMBLY (CONT'D)
10
7
4051 - 1 - 1
03C2T02168
Z
0300 035H
09G
1004
7
4051 - 1 - 1
03C2T02168
Z
0300 035H
09G
1004
Figure 76Figure 75
424
425
426
427
422
421
423
421 B1 CLUTCH "BELLVILLE" CUSHION SPRING.
422 B1 CLUTCH BACKING PLATE.
423 B1 CLUTCH FRICTION PLATES (QTY MAY VARY).
424 B1 CLUTCH STEEL PLATES (QTY MAY VARY).
425 B1 CLUTCH PRESSURE PLATE.
426 B1 CLUTCH HOUSING RETAINING SNAP RING.
427 B1 CLUTCH HOUSING.
55
Copyright © 2010 ATSGCopyright © 2010 ATSG
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
WWW.ALL-TRANS.BY