Repair Manual

61
Copyright © 2010 ATSGCopyright © 2010 ATSG
Copyright © 2010 ATSG
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
7
4051 - 1 - 1
03C2T02168
Z
0300 035H
09G
1004
482
482 B2 CLUTCH APPLY PISTON.
482
483
484
TRANSAXLE DISASSEMBLY (CONT'D)
71. Apply compressed air to the B2 clutch passage
in the case, as shown in Figure 86, to loosen the
B2 clutch piston.
72. Remove the B2 clutch piston from transaxle case
as shown in Figure 87.
73. Remove and discard the inner and outer "O" ring
seals, as shown in Figure 88.
74. This completes transaxle disassembly.
Figure 87 Figure 88
Figure 86
E
A
AD I U.S.M
N
482 B2 CLUTCH APPLY PISTON.
483 B2 CLUTCH APPLY PISTON INNER "O" RING SEAL.
484 B2 CLUTCH APPLY PISTON OUTER "O" RING SEAL.
B2 CASE PASSAGE
WWW.ALL-TRANS.BY