Repair Manual

462

463

464

465

FRONT SUN

GEAR CANNOT

BE REMOVED

466

467 468 469

470

471

472 473

462 F1 ROLLER CLUTCH SNAP RING (.048" THICKNESS).

463 F1 ROLLER CLUTCH ASSEMBLY.

464 NUMBER 7 THRUST WASHER (BRONZE).

465 REAR PLANETARY "RAVIGNEAUX" GEAR SET.

466 NUMBER 10 THRUST WASHER (PLASTIC).

467 NUMBER 8 "FRONT" THRUST BEARING RACE.

468 NUMBER 8 THRUST BEARING.

469 NUMBER 8 "REAR" THRUST BEARING RACE.

470 REAR SUN GEAR.

471 NUMBER 9 "FRONT" THRUST BEARING RACE.

472 NUMBER 9 THRUST BEARING.

473 NUMBER 9 "REAR" THRUST BEARING RACE.

REAR PLANETARY GEAR SET AND ASSOCIATED PARTS, EXPLODED VIEW

REAR PLANETARY ASSEMBLY

COMPONENT REBUILD (CONT'D)

Figure 129

1. Disassemble the rear planetary assembly using

Figure 129 as a guide.

Note: Front sun gear is captured and cannot

be removed from rear planetary carrier.

3. Clean all rear planetary parts thoroughly and

dry with compressed air.

3. Inspect all rear planetary parts thoroughly for

any wear and/or damage, replace as necessary.

WARNING: At time of this printing, there are not

any new "hard parts" available from the

manufacturer for this unit. The only source will be

used aftermarket suppliers.

Continued on Page 81

AUTOMATIC TRANSMISSION SERVICE GROUP

Technical Service Information