Owner`s manual
10
ATTACH THE DASHBOARD TO
THE WINDSHIELD
Insert the two tabs coming from the front of the dashboard
into the slots at the boom of the Windshield.
Turn the dashboard assembly over, and insert a screw into
the two screw locaons. Tighten the screws.
ATTACH THE DASHBOARD ASSEMBLY
While holding the dashboard assembly together, align the
two tabs from the dashboard assembly with the two slots
located at the front of the dashboard area.
Route the wire coming from the side of the dashboard down
into the hole on the right side of the dashboard area, and
connect it with the wire under the wheel well.
1
1
3
3
4
Two screws are
needed for this step.
2
2