Operation Manual

17
VW-05
CAR NAVIGATION SYSTEM
EN
Thema:
Startup operations
Insert a CD/DVD
Insert the disc with the mirror surface
downwards. The playback will start
automatically. Make sure that the disc is
intact and dirt-free.
Using the 1 button on the front panel
eject the disc if required.
Factory settings
Pressing the RST button you can set
the unit back to the factory settings.
Use a pencil or similar to press the
button. After reset the unit shuts down
automatically.
Sart the navigation
Press the NAVI button on the front
panel. A detailed software description
you will nd on the homepage of the
software producer.
Unit on/off
Press the PWR button to turn the unit
on.
If the unit is already on, keep the PWR
button pressed for a couple of seconds
to turn it down.
Insert a micro SD card
Insert a micro SD card into the slot with
the label side to the right and the pin
side to the left.
Make sure that the card is intact and
dirt-free.
Insert a USB flash drive
Insert an USB ash drive proper into a
USB plug.
Do not insert any heavy or big USB
ash drives in order not to hit it
accidently - it could cause damages of
the USB plug or USB ash drive.
Micro SD cards and USB ash
drives should have following le-
system format: exFat or Fat32. Other
types will not be supported.
i