User manual

VOLKTEK NSH-5632 MANAGED 24-SLOT 100BASE-TX/FX SFP + 4 G COMBO L3 SWITCH

Step 3: This is the User’s Agreement page. Read through it and click on the “I Agree”

button. (The page also gives you the option to choose “Typical setup” or “Custom setup”.

(The software vendor strongly suggests that the user selects option 1 – Typical.)

Step 4: If Internet Explorer is set as

the default browser on your system,

then the Java Runtime Environment

5.0 Update 5 – Google Programs

dialog box will appear. By default,

Google Toolbar for Internet Explorer

is checked. Click the “Next” button.

This will start installing selected

program features, including the JRE,

on your system.

Note: You can choose to install or

ignore this useful additional program by checking or un-checking the check box.

Step 5: This page appears when the

installation process has started and

shows you how far the process has

progressed. Depending on your

connection speed, the process can

take between 5 and 30 minutes.

Step 6: A few brief dialog boxes will confirm the last steps of the installation process,

and a concluding message will appear with the confirmation "Installation Completed

OK." Click “Finish”.

Step 7: After finishing the installation process, the

program will show this page every time you type the

IP address. The default User Name and Password

is “admin” and “admin”.

Click OK to enter the management interface of the