User manual

VOLKTEK NSH-5632 MANAGED 24-SLOT 100BASE-TX/FX SFP + 4 G COMBO L3 SWITCH

7.6.4.3 Multicast Route – PIM-DM

This function is used to configure PIM-DM.

Status: Enable or disable PIM-DM for specific interface.

Select the corresponding interface to configure parameters then click on the Modify

button. The field you changed will update the content in the display window. To save any

changes and make it effective immediately, click Submit. Use Refresh to refresh the

setting.

NOTE: The system only supports PIM-DM version 2.

NOTE: Before enabling, the “IP Multicast Route Mode” on the IGMP page

must be set to “PIM-DM”.