User manual

VOLKTEK NSH-5632 MANAGED 24-SLOT 100BASE-TX/FX SFP + 4 G COMBO L3 SWITCH
7.7.4 Mirroring
Port Mirroring, together with a network traffic analyzer, helps you monitor network traffics.
You can monitor the selected ports for egress or ingress packets.
Mirror: Selects the mirrored port from selection panel. The selected port can be
mirrored for Ingress, Egress or Both of traffic.
Mirror Mode: Enables or disables the mirror function for the selected group.
Stack ID: For a standalone switch, only ID 1 is available.
Monitor Port: Receives the copies of all the packets in the selected mirrored ports.
The monitor port cannot belong to any link aggregation group.
The monitor port cannot operate as a normal switch port. It does not switch
packets or learn addresses.
Click Submit to set the changes to the connected Switch. Click Refresh to show the
values of the Switch.
To eventually store all settings permanent in Flash memory, go to “Save
Configuration” page (bottom of management menu) and click “Save”.
Mirroring
7.7.5 Static Multicast
This page can add multicast addresses into the multicast table. The switch can hold up
to 256 multicast entries. All the ports in the group will forward the specified multicast
packets to other ports in the group.
Port: selects the port from selection panel. Or select an existing group address from
list panel to display
50