User manual

VOLKTEK NSH-5632 MANAGED 24-SLOT 100BASE-TX/FX SFP + 4 G COMBO L3 SWITCH

Confirm Authentication Key: Re-type the key entered above.

NOTE: The VLAN of the RADIUS server connected to the switch must be the

same as the VLAN of the system management interface.

Click Submit to save changes to RAM memory. Click Refresh to view effect of changes.

To eventually make all the changes permanent in Flash memory, go to the Save

Configuration page (bottom of management menu) and click Save.

Radius

7.11 Traffic Chart

These statistical chart pages provide network flow information. The user can specify the

time limits for chart refresh updates. The charts allow the user to monitor different types

of network traffic. Most MIB-II counters are displayed in these charts.

Auto Refresh sets the time interval at which new data is retrieved from the switch.

Color lets the user assign a different color to each variable. After the variables have

been set, Draw lets the browser draw the graphic chart. Each new Drawing will reset the

statistics display.

7.11.1 Traffic Comparison Chart

This page shows one statistic for all the ports in one graphic chart. Specify the statistic

to be displayed and then click Draw. The browser will refresh the graph periodically.