User manual

VoloFone™ VF100 User Manual

Call Barring continued

Bar All Outgoing International Calls enable

Bar All Outgoing International Calls disable

*331*<password>Flash

#331*<password>Flash

Bar All Outgoing International Calls except to Home

Country enable

Bar All Outgoing International Calls except to Home

Country disable

*332*<password>Flash

#332*<password>Flash

All Outgoing Call Barring disable

#333*<password>Flash

The next section refers to In Call features. These commands are executed while a call is in progress.

Feature

Keypad sequence

Answer a Call in Waiting

Flash2#

Alternates between the calls

Multiparty Call – A call is in progress and there is another

incoming call

Flash2# to put current call on hold

and pick up the incoming call; then,

Flash3# to connect all calls

Multiparty Call – A call is in progress and you make another

call

Flash2# to put current call on hold,

make another call by

Flash[number]*,

when call is answered,

Flash3# to connect all calls

Call Transfer

Flash4# to disconnect self and

connect the other two calls.

Cancelling a Command

For all commands except the In-Call Feature commands, hanging up the telephone handset or pressing

the Cancel button in VoloAdmin™ will cancel it.

Command Success/Failure Indication

For a command entered using the keypad, you will hear a higher pitch tone to indicate success. A lower

pitch tone indicates failure.