User manual

VoloFone™ VF100 User Manual

No LAN Connection

If you cannot access the local network from a PC that is connected to an Ethernet switch or hub that is

connected to the VoloFone™ VF100, take the following actions to identify and solve the problem:

Check that at least one of the LAN connector indicators (Link light) is green. If not, check that the Ethernet

cable(s) is properly connected or try using another Ethernet cable. Also, the yellow Activity light should flash

if network traffic is present.

Check that the PC is configured to obtain IP address automatically using DHCP. If not, change the PC

TCP/IP settings. For further information, see Connecting the VoloFone™ VF100 to a Computer or the manual

of your operating system.

Check that an IP Address has been allocated to your computer by the VoloFone™ VF100. To do this,

proceed as follows:

 From the Windows Start menu select Run.

 The Run dialog appears.

 Enter cmd as the command to run and press Enter.

The Windows Cmd window appears.

 Type ipconfig and press Enter.

The Windows IP Configuration is displayed.

Under the heading Ethernet adapter Local Area Connection the IP address allocated to the computer

by the VoloFone™ VF100 is displayed. In this example, 192.168.0.109.