User manual

VoloFone™ VF100 User Manual
Copyright © Vololink Pty Ltd 2006-08 V1.1 Jan 2008 Page 7 of 50
Installing the USIM card
Before attempting to install the USIM card, disconnect the power pack.
The USIM card is installed in the underside of the VoloFone™ VF100. To install the USIM card proceed as
follows:
1 Turn the VoloFone™ over to reveal the USIM slot shown below.
Front ►
2 Insert the USIM card with the cut corner facing the front of the VoloFone™ VF100.
3 Gently press the USIM card into the slot. You will feel a click as the card seats.
USIM
shown
fitted ►
4 Place the VoloFone™ VF100 back onto the base and push down to lock together.
Removing the USIM card
Before attempting to remove the USIM card, disconnect the power pack.
To remove the USIM card simply press gently on the card. You will feel a click as the card is released. The
card is ejected from the USIM slot.