INSTALLATION & MAINTENANCE GUIDE AMP® Low Voltage Landscape Lighting AMP® Path Light with Light Ring AAR-X-I-B-BZ Help Hotline: 1-813-978-3900 • Mon-Fri 9am-6pm (EST) w w w. a m p l i g h t i n g .
INSTALLATION & MAINTENANCE GUIDE AMP® Path Light with Light Ring AAR-X-I-B-BZ ! Important: Please Read Before Installation This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty. These instructions do not intend to cover all variations in installation, operation maintenance or mounting situations. 1.
INSTALLATION & MAINTENANCE GUIDE AMP® Path Light with Light Ring AAR-X-I-B-BZ Package Contents A. (1) Fixture Body Parts Sold Separately A. Mounting Accessory B. Hat Product Dimensions 9” 2.75” 22.5” customersupport@amplighting.com • 813.978.
INSTALLATION & MAINTENANCE GUIDE AMP® Path Light with Light Ring AAR-X-I-B-BZ 1 Install Stake Determine the desired location for mounting the stake. Hammer the stake into the ground until flange of stake is flush to grade. To avoid damage to the stake, place a board on top of the stake while hammering. Board Stake Ground Note: If the ground is hard and the stake is difficult to install, make a crosscut in the ground using a flat shovel.
INSTALLATION & MAINTENANCE GUIDE AMP® Path Light with Light Ring AAR-X-I-B-BZ 3 Wire Connections Fixture Wires Wire Connectors Main Supply Cable Strip both leads from the fixture wires. Using two UL listed wire connectors (sold separately), connect the leads from the fixture wires to the main supply cable leads. 4 Install Spun Brass Hat (Option A) Remove the finial from the light ring first. Place the hat of your choice onto the light ring and secure with the finial. Hand tighten until snug.
INSTALLATION & MAINTENANCE GUIDE AMP® Path Light with Light Ring AAR-X-I-B-BZ 5 Install Cast Brass Hat (Option B) Hat Light Ring Thread the hat of your choice onto the stem top. Hand tighten until snug. Note: For Cast Brass hats you will not need a finial to install the hat. You will screw the hat directly to the top of the stem using the coupler. w w w. a m p l i g h t i n g .
INSTALLATION & MAINTENANCE GUIDE AMP® Path Light with Light Ring AAR-X-I-B-BZ customersupport@amplighting.com • 813.978.
Help Hotline: 1-813-978-3900 • Mon-Fri 9am-6pm (EST) Specifications and product details subject to change without notice. © Copyright 2022, AMP® Lighting, Lutz FL USA 33549 • All rights reserved. customersupport@amplighting.com • 813.978.