Information

m_flag:
This flag bit is 1, said unit is M carry. Example : 1.023mF
.
Msg[11]
Com4 Com3 Com2 Com1 Hold_flag rel_flag ohm_flag F_flag
Hold_flag:
This bit represents the status of the HOLD function. This bit becomes 1 if the hold function is on.
Rel_flag:
When REL function is on, this bit becomes 1, and the current transmitted data at DISP2 is the relative value.
Manu_flag:
Hold_flag:
This bit represents the status of the HOLD function. This bit becomes 1 if the hold function is on.
ohm_flag
This flag bit is 1, said resistance measurement.
F_flag
This flag bit is 1, said capacitance measurement .
Msg[12]
Com4 Com3 Com2 Com1 Low_batt_flag Hz_flag V_flag A_flag
Low_batt_flag:
This bit represents the battery status. This bit becomes 1 when low voltage status is on.
Hz_flag:
This flag bit is 1, said frequency measurement.
V_flag:
This flag bit is 1, said Voltage measurement.
A_flag:
This flag bit is 1, said current measurement.
Msg[13]
Com4 Com3 Com2 Com1 No use No use No use No use
Vc820_vc840_vc860
2011_4_14