Manualshelf

User manual

ManualsBrandsVOLTCRAFT ManualsModel Making Charger SystemsScale model multifunction charger 12 V, 230 V 7 A V-Charge 50 inkl. Alu-Koffer
31323334353637383940
40
7.
Display of the rechargeable battery and charger temperatures
Ext.Temp 0C
Int.Temp 27C
This function shows the external rechargeable battery temperature and the internal temperature of the charger.
The external temperature can only be displayed if an external temperature sensor is connected to the
charger (not enclosed, but available as an accessory).
8.
Loading factory settings (reset)
LOAD FACTORY SET
ENTER
This recovers the factory settings (reset).
Keep the button „START/ENTER“ pressed for 3 seconds. The lower display line shows „COMPLETED“; the charger
restarts and then is in the main menu again.
Observe that all values set by you are then reset to factory settings; the 10 rechargeable battery memories
(see chapter 14) are also deleted.
9.
Display rmware version
VERSION
4.01
The current rmware of the charger is displayed at the lower right of the display.