BATTERY CHARGING STATION „CHARGE MANAGER 2024“ OPERATING INSTRUCTIONS FOR THE SOFTWARE Item no.
TABLE OF CONTENTS Page 1. Functions of the „CM2024 Logger“ Software............................................................................................................................................... 3 2. Installation of the „CM2024 Logger“ Software.............................................................................................................................................. 3 3. Getting Started.........................................................................................
1. FUNCTIONS OF THE „CM2024 LOGGER“ SOFTWARE • Display of the selected programme, the current programme section, the rechargeable battery chemistry, the time and charging parameters, such as voltage and charging current • Recording the progress of voltage, current, charging and discharging capacity, etc.
3. GETTING STARTED At the first start of the software, you need to select the COM port of the „Charge Manager 2024“ according to the entry in the control panel (in this example „COM7“. This setting can be changed under „Settings/COM-Port“ later. After confirming the selection with „OK“, the main window of the software appears.
4. OPERATION OF THE SOFTWARE View during data recording: 1 8 2 3 4 5 9 6 10 1 Load, save and import recordings from card 2 Setting the COM-port/display brightness. Terminating the recording on the SD memory card 3 Export to Excel or „CSV-file“ 4 View: Chart and/or table 5 Print measuring log 6 Delete recording 7 Automatic display of the last measured value in the table 8 Display for data reception from the charger 9 Display of the recorded data in table form.
General Notes: • The recorded data are always put in interim storage in parallel to the display in the temporary files as well. If there are temporary files at programme start, the programme offers to continue the recording. • When removing a rechargeable battery during the recording, the associated values are automatically deleted. This ensures data integrity. • The export functions for „Excel“ and „CSV“ refer only to the currently chosen charging slot.
5. STARTING CHARGING PROGRAMMES If one or several rechargeable batteries are inserted, the parameter display shows „No Setup“. The parameter setup of the battery slot where programme input is possible is displayed in blue. After clicking the parameter display, the charge programme input is now displayed. The parameters suggested by the charger are displayed and can now be changed. After clicking „Start“, the charging programme is executed.
7. SAVING/LOADING RECORDINGS The charge curves can be saved on the SD memory card and/or the PC („Save Logged Data“). When saving on the PC, it must be continually connected to the charger and the recording („Logging“) must be active. If the charging curves have been recorded on the SD memory card, the data can only be read via a card reader at the PC subsequently („Import Log File from SD Card“). It is also possible to load the saved records again with this software („Load Logged Data“). 8.
. DISPLAY OPTIONS Under „Display Style“, you can select the required display. If „Table“ is selected, only the data in table form are shown; when selecting „Charts“, the illustration of the curves for voltage and current in graphic form is active. There is also the option of concurrent display of both versions.
. OPERATION OF THE CHART FUNCTION Functions: Four views are possible: Line, bar, area chart and lines in 3D perspective („Tilt“ and „Rotation“ can be set).
Enlarging to certain areas, „Zoom“ by mouse: Keep the left mouse button pushed in the graphical display and draw a frame over the desired area. After releasing the mouse button, the selected area is shown enlarged. Alternative: Move the mouse pointer to the area of the chart and right-click. The following input field appears (see figure on the right). • „Zoom In“ enlarges the view by half of the recording. • „Reset Zoom“ takes you back to the overall view.
11. SETUP „SETTINGS“ „COM Port“: Selection of the COM-port (only possible when no recording is running) „LCD brightness“: Setting the display brightness of the „Charge Manager 2024“ (only possible when the recording is running) „Release SD-Card“: Terminate recording on the SD-memory card (only possible when a recording is running) 12. Suspend/CONTINUe RECORDINGS After disconnecting the mains unit of the charger, the following message will be displayed by the software after approx.
( Legal Notice This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status at the time of printing. © Copyright 2015 by Conrad Electronic SE.