User manual

11. SETUP „SETTINGS“

„COMPort“: SelectionoftheCOM-port(onlypossiblewhennorecordingisrunning)

„LCDbrightness“: Settingthedisplaybrightnessofthe„ChargeManager2024“(onlypossiblewhentherecordingisrunning)

„ReleaseSD-Card“: TerminaterecordingontheSD-memorycard(onlypossiblewhenarecordingisrunning)

12. SUSPEND/CONTINUE RECORDINGS

Afterdisconnectingthemainsunitofthecharger,thefollowingmessagewillbedisplayedbythesoftwareafterapprox.10seconds:

Nowclosethesoftware.Ifrequired,thecomputercannowbeswitchedoff.

Thesoftwarewilloffertocontinuetherecordingatthenextprogrammestart.

Youcannowtakethechargerintooperationagainandthenconrmthesoftwaremessagewith„Yes“.Nowthelastrecordeddataareloaded

and the recordings are automatically continued.

Whenselecting„no“,thedataaredeletedandanewrecordingisstarted.

 Ifthesoftwarehasnotbeenterminated,pushthebutton„StartLogging“aftertakingthe„ChargeManager2024“intooperation.The

recording is continued here as well.