User manual

34
6. Press and hold SET button for approx. 3 seconds to exit the settings menu.
g. 28
g. 30
g. 29
g) Factory reset:
1. In case the display of the device malfunctions you may use the RESET (2) button to reset the
device. The clock and power consumption values of the day (from 00:00 to 23:59 o’clock) will be
reset to 0. You will then have to set the clock again.
h) Displaying the forecast
1. In order to display the forecast based on current consumption in xed intervals you will have to
connect the device to the mains supply. Press and hold the F button for approx. 3 seconds to
enter the forecast mode.
2. Press
button to display the forecast calculations for energy consumption, costs and GHG/CO2
in xed intervals.
3. Press SET button to switch between energy consumption in “kWh” and GHG/CO
2 in “kg” (g. 31
+ 32).
4. Each time pressing
button will change the display as follows:
“DAY”
“WEEK” “MONTH” “YEAR”
(g. 31, 32, 33, 34).
g. 34
g. 31
g. 32 g. 33
You may also display a forecast based on accumulated values. In order to do so, disconnect the
power consumption meter from the mains supply. Press and hold the F button for approx. 3 seconds
to enter the forecast mode. Follow steps 1. to 4. in order to display accumulated values per day,
week, month or year.
Press and hold F button for approx. 3 seconds to exit the forecast mode.