User manual

• “TARIFF 1” appears in the upper display, the electricity tariff can now be set.

If you only have one electricity tariff with your electricity company, enter the same price

for both electricity tariffs (“TARIFF 1” and “TARIFF 2”). The starting time does not matter

since the electricity costs are the same.

If you have two different electricity tariffs (e.g. day-time electricity and night-time electric-

ity), set the price for the day-time tariff (“TARIFF 1”) and the starting time for this tariff

(e.g. 06:00) rst and then the price for night-time electricity and its starting time (e.g.

22:00) for the second electricity tariff (“TARIFF 2”).

Possible special times for switching between day-time and night-time electricity (week-

ends, public holidays) cannot be included in the measuring device. Therefore, there will

be slight differences between the actual costs and the costs displayed by the measuring

device.

• Briey press the “SET” (1) button, the currency symbol ashes.

• Set the desired currency (“€”, “$”, “£” or “CHF”) with the “ ” (4) or “ ” (5) button.

• Press the “SET“ button (1) briey.

• The rst position of the electricity price for tariff 1 ashes.

Change the numeric value of the ashing input position with the “ ” (4) or “ ” (5) button.

Briey press the “SET” (1) button to conrm and the next input position will be activated.

After conrming the last input position, the hours of the starting time for electricity tariff 1 (for

example day-time electricity) ash.

•

Set the hours of the starting time for electricity tariff 1 with the “ ” (4) or “ ” (5) button.

• Briey press the “SET” (1) button, the minutes of the starting time for electricity tariff 1 ash.

• Set the minutes of the starting time for electricity tariff 1 with the “ ” (4) or “ ” (5)

button.

• Press the “SET” button (1) to conrm and “TARIFF 2” will appear in the display; the second

electricity tariff can now be set (e.g. night-time electricity).

• The rst position of the electricity price for tariff 2 ashes.

Change the numeric value of the ashing input position with the “ ” (4) or “ ” (5) button.

Briey press the “SET” (1) button to conrm and the next input position will be activated.