User manual

39
After conrming the last input position, the hours of the starting time for electricity tariff 2 (for
example night-time electricity) ash.
• Set the hours of the starting time for electricity tariff 2 with the “ ” (4) or “ ” (5) button.
• Briey press the “SET” (1) button, the minutes of the starting time for electricity tariff 2 ash.
• Set the minutes of the starting time for electricity tariff 2 with the “ ” (4) or “ ” (5)
button.
• Press the “SET” button (1) briey for conrmation. The display stops ashing and the price
for electricity tariff 1 set before will be shown.
• By briey pressing the “ ” button (5), you can set the CO
2
value (“GHG” = greenhouse
gas), see next section e). If you want to correct the electricity tariff settings, briey press the
“SET” button (1) and proceed as described above.
If you want to close the set-up mode, hold the “SET” button (1) pressed for 3 seconds
(or do not press a button for one minute).