Operation Manual

102
21. MAINTENANCE AND CLEANING
The product does not require any maintenance. You should never take it apart.
The product should only be repaired by a specialist or specialist workshop or it may be
damaged. Furthermore, the CE approval and the guarantee/warranty will become void.
Only clean the product with a soft, clean, dry and lint-free cloth. Never use any cleaning
agents, since this might damage the surface of the housing and inscription.
Dust can be removed using a clean, soft brush and a vacuum cleaner.
22. HANDLING
• Observe all safety instructions in these operating instructions. They provide
you with important information about the dangers involved when handling
battery chargers and batteries.
• The product is not a toy and should be kept out of the reach of children.
Children cannot judge the dangers involved when handling chargers or
batteries.
• Avoid the following unfavourable ambient conditions at the place of installa-
tion, during operation or transport:
- moisture or high humidity
- extreme cold (< 0°C) or heat (> +35°C), direct sunlight
- dust or flammable gases, fumes or solvents
- strong vibrations, impacts or blows
- strong magnetic fields as present near machines or loudspeakers
• Place the charger on a level, firm surface. It must be large enough so that
the battery attached can be safety placed alongside the charger. Maintain a
sufficient distance between the charger and battery (and the power supply)
to prevent them from heating each other up.
The battery must not be placed on or under the charger!
• When setting up and using the product, make sure that the cable is not
folded or squeezed.