User manual

c) Create conguration le by software and load the

conguration le created from software onto data logger

• Connect the data logger to your computer.

• Start the Voltsoft software and follow the operating instructions in the

software manual (section 6 and choose your supported device).

• Disconnect the data logger from your computer.

d) Perform conguration setting on the website

There are 3 options to open the conguration website:

• Open www.conrad.com in a browser and navigate to the data logger

product page by using the item number (e.g. 1435090 for DL-200T

data logger). Click on the link for the conguration website to open the

website.

• Open http://datalogger.voltcraft.com/CongBuilder/index.jsp in a

browser.

• Connect the data logger to your computer. Open the data logger drive

on your computer. Click on the link “Conguration Website.html” to open

the conguration website.

Main Screen - Overview

General

Settings

Choose the desired language for the website by

clicking on the corresponding ag.

Select the model of your data logger. The model

name is mentioned on the packaging and/or

product. Chosen model type will be highlighted

in red.