User manual

Voltsoft User Manual Version 2.4
102
6.11.4 DL111K – Settings
1
Time
Configure the device data time value.
The user can specify a defined time or use the system
date time.
2
Logger Name
Input the unique alias for that device.
3
Record Start Condition
By Button – The data logger will start recording only
after the user pressed the red button on
the device.
After Setup – The data logger will start recording
immediately after setup.
4
Delay Time
Only available if “After Setup” selected.
Specify the delay time for recording start after setup.
5
Sample Rate
Instruct the logger to log readings at a specific rate.
7
LED Flash Cycle
Configure the LED flash cycle - the longer the time, the
longer the battery life.
8
Unit
Select temperature unit (Celsius or Fahrenheit)
9
Temperature Low / High
Alarm
Configure the temperature low / high alarm level.
10
Default Button
Reload the factory default settings.
11
Setup Button
Save changes.
12
Close Button
Close this interface.