User manual

Voltsoft User Manual Version 2.4
63
6.5.4 DL161S – Settings
1
Time
Configure the device data time value.
User can specify a defined time or use the system date
time.
2
Logger Name
Input the unique alias for that device.
3
Sound Unit
The sound unit can be dBA or dBC.
4
Measuring speed
The measuring speed can be Fast or Slow.
5
Record Start Condition
By Button – The data logger will start recording only
after the user pressed the red button on
the device.
After Setup – The data logger will start recording
immediately after setup.
6
Sample Rate
Instruct the data logger to log readings at a specific
rate.
7
Sample Points
Configure the data logger sample points.
8
Infinite
For real time mode only, the download will not stop
until the user stopped the download.
9
Recording Time
Calculate the recording time based on the selected
sample points and sample rate.
10
LED Flash Cycle
Configure the LED flash cycle - the longer the time, the
longer the battery life.
11
Logger Mode
Manual – The data logger will start recording only
after the user presses the red button on
the device.
Instant – The data logger will start recording
immediately after setup.
12
Storage Setup
Storage can be Store or Real Time.
Store – The data will be stored in offline mode.