User manual
45
• Always lay the cables so that nobody can trip over or become entangled in them. This
poses a risk of injury.
• When working with power supplies or chargers, do not wear any metallic or conductive
chains, bracelets, rings etc. Never connect the power supply or charger with humans
or animals.
• Check the product for damage(s) each time before use. If you discover any damages,
do not use the product. Disconnect the power supply and unplug the mains adapter
from the wall outlet. Then bring the product to a specialised workshop.
• Use only a proper mains socket (230V~/50Hz) connected to the public power supply.
• The mains outlet must be located near to the device and be easily accessible.
• Do not touch the mains cable if it is damaged. First, power down the respective mains
socket (e.g. via the respective circuit breaker) and then carefully pull the mains plug
from the mains socket. Never use the product if the mains cable is damaged.
• A damaged mains cable may only be replaced by the manufacturer, a workshop
commissioned by the manufacturer or a similarly qualied person, so as to prevent any
danger.
• Never plug in or unplug the mains plug when your hands are wet.
• Do not pull the mains adapter out of the wall outlet by its cable!
• The plug must be pulled out of the socket under the following conditions:
- before cleaning the product
- during a thunder storm
- if the product is not being used over a long period.
• Make sure that the product is provided with adequate ventilation during operation. Do
not cover the ventilation openings with magazines, blankets, curtains or similar. Keep a
minimum distance of approx. 15 cm from other objects.
• When setting up the product, make sure that the cable is not pinched, kinked or
damaged by sharp edges.
• Make sure there are no devices with strong electric or magnetic elds such as
transformers, motors, cordless telephones and radio-controlled devices in the vicinity
of the product as these can inuence the product.
• Do not operate the product in places or rooms with unfavourable ambient conditions.
This can damage the sensitive electronics found inside the product and can potentially
pose life-threatening risks. Poor ambient conditions are:
- High humidity (> 80 % relative, condensation)
- Humidity, dust, ammable gases, solvent vapours, benzine
- High ambient temperatures (> approx. +50 ºC)
- Electromagnetic elds (motors, transformers, audio systems for model building etc.)
or electrostatic elds