User manual

12. SOFTWARE INSTALLATION

Software is compatible with Windows

operating systems XP, 2003, Vista, 7 ,8

1. Insert the supplied software CD into the DVD drive of your computer.

2. Located in directory USB CP210x Drivers... install the driver (USB to UART Bridge) suitable to

your operating system.

3. Copy the directory hcs from the CD to the computer’s application directory or any location of your

choosing.

4. Open the le hcs.bat in the directory hcs. The progam starts up.

13. CONTROL WITH THE PC SOFTWARE

1. Set selection switch MODE (8) into position Normal.

2. Connect the power supply with the USB cable to a USB hub on your computer. Connect the USB

cable to the USB port (13) on the rear.

3. Turn the power supply on.

4. Start the program with the hcs.bat le. After start-up the power supply is controlled via the program.

5. The control indicator REAR CONTROL (2) lights up. The power supply no longer registers inputs

by the front control knobs.