Manualshelf

User manual

ManualsBrandsVOLTCRAFT ManualsLaboratory & Bench PSUsBench PSU (adjustable voltage) 1 - 16 Vdc 0 - 30 A
71727374757677787980
74
b) Resetting output presets (P1/P2/P3) to factory default values
The power supply allows for presetting three voltage values (including current settings) by means of
three memory slots: P1, P2, and P3. In case you want to reset the memory slots to the factory default
values during operation, do the following.
1. Press and hold the VOLTAGE control knob for approx. 30 s to enter the MENU mode. “CCO” and
“no” are displayed.
2. Rotate the VOLTAGE control knob until “rPr” and “no” are displayed.
3. Rotate the CURRENT control knob until “rPr” and “YES” are displayed.
4. Press the CURRENT control knob once to reset the preset values. “YES” lights up when the values
have been successfully reset.
5. Press the VOLTAGE control knob to exit the MENU mode.
<English-end>