Manualshelf

User manual

ManualsBrandsVOLTCRAFT ManualsLaboratory Test EquipmentPC scope module DSO-2150AL 80 MHz 2-channel 250 null 64 null 8 Bit Digital storage (DSO), Spectrum analyzer
51525354555657585960
DSO-1052 USB
DSO-1082 USB
3.7 Measure Signal
3.7.1 Cursor
Click “Cursor” in main menu.
This method allows you to take measurements by moving the cursors.
1. Source
The user can set the source to CH1, CH2, FFT and MATH. But the FFT source can only
When you use cursors, be sure to set the Source to the waveform on the display that you
use Trace type.
want to measure.
2. Type
There are four types of cursors: Cross, Trace, Vertical and Horizontal.
1) Cross
The Cross cursors appear as cross lines on the display and measure the vertical and
horizontal parameters.
The Cross cursor display window:
USER’S MANUAL 53