Datasheet

ManualsBrandsVOLTCRAFT ManualsLaboratory Test EquipmentDigital 80 MHz 4-channel 1 GSa/s 64 kpts 8 Bit Digital storage (DSO)

“For more than 25 years, our product range has been dynamically adapting to the constant changes in the industry. We

commit to offering rst-class quality to our customers while delivering an excellent cost-performance ratio. This philosophy

remains the cornerstone of Voltcraft’s success.”

Item no. 1590010

VOLTCRAFT

- TOP PERFORMANCE IN EVERY WAY

DSO-1084-1104-1204-1254E/F-1204E/SE

DIGITAL-OSCILLOSCOPE

VERSION 09/18

Nº 1562815; 1589981; 1589986-87; 1590010; 1590022-24; 1692855

The digital oscilloscope is intended to be used for visualising electrical magnitudes and signals. There are four indepen-

dent input channels available for measurement. The measuring lead is connected to the oscilloscope via two BNC sockets.

Integrated help system can be called up on the display. The signals measured can be displayed on the display as well as

on a PC when a USB cable is used.

FEATURES:

80 MHz / 100 MHz / 200 MHz / 250 MHz bandwidth //

1 GSa/s real-time sampling rate // Advantage set of 4 probe

heads // Amplitude 5 mVss - 3,5 Vss (50 Ω) // The DSO-

1xx4F is also equipped with a frequency generator //

TECHNICAL DATA:

Rise-time ≤ 4,4 ns / < 3,5 ns / ≤ 1,8 ns / < 1,4 ns

Resolution 8 bit

Input impedance 1 MOhm ± 2% // 20 pF ±3pF

Max. input voltage 300 V rms ( probe setting 10×)

Input coupling DC-AC-GND

Sampling rate max. 1 GSa/s

Memory depth max. 64 Kpts

Vertical deection: 500 µV - 10 V/div

Time-base range 2 ns - 100 s/div

Measurement category CAT II 300 V

Waveform frequency Sine: 0.1 Hz -25 MHz; Square: 0.1 Hz - 10 MHz;

Ramp: 0.1 Hz - 1 MHz; EXP: 0.1 Hz - 5 MHz

Sampling rate 200 MS / s

Display size 17,8 cm (7”)

Power supply 100 – 120 V AC / 45 – 440 Hz

120 – 240 V AC / 45 – 60 Hz

Power consumption < 30 W

Operating temperature 0 °C to +50 °C, ≤ 90% non-condensing,

Dimensions (L x W x H) 318 x 110 x 150mm

Weight 2900 g

PACKAGE CONTENTS:

4 probe heads (each 1: 1/10: 1) // Mains cable // USB cable //

A BNC to BNC cable (only for the scopes with waveform

generator function) // Software // Detailed operating

instructions (english) // Quick start guide (multilingual) //

Item no. 1562815

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All

rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture

in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is

prohibited. This publication represents the technical status at the time of printing.