Instructions
Table Of Contents
- 1.General Safety Requirement
- 2.Safety Terms and Symbols
- 3.Quick start
- 4.Panel Operation
- Channel Setting
- Waveform Setting
- Output the modulated waves
- Hexadecimal frequency shift keying (3FSK)
- Quaternary frequency shift keying (4FSK)
- Binary phase shift keying (BPSK)
- Oscillating keying (OSK)
- Output the sweep frequency (Sweep)
- Output the burst (Burst)
- Counter
- Utility function setting
- Edit the Arbitrary Wave (Edit)
- File system (Store)
- Save/recall instrument settings (Preset)
- Use build-in help (Help)
- 5.Communicate with PC
- 6.Troubleshooting
- 7.Specification
- 8.Appendix
4
.
Panel Operation
14
display the symmetrical value of the input, press the X soft key to delete the
last digit, press the ← soft key to cancel the input, and press the Enter
softkey to indicate the default input.
Figure 4- 5: Set the symmetry of ramp wave
Output Pulse Wave
Press , the screen displays the user interface of the pulse wave. By operating
the pulse wave menu on the right side of the screen, the output waveform
parameters of the pulse wave can be set.
The pulse wave menu includes: frequency/period, amplitude/high level, offset/low
level, start phase, pulse width/duty cycle, rise time/fall time.
For the setting frequency/period, amplitude/high level, offset/low level, and starting
phase, please refer to Output Sine Wave on page 10.