Instructions

4
.
Panel Operation
17
Set the pulse width/duty cycle
Press the Pulse Width/Duty Cycle softkey to select the Pulse Width menu item. As
shown in Figure 5-7, parameter 1 displays the current value of the pulse width. Press
the Pulse Width/Duty Cycle button to display the duty cycle.
Set the pulse width parameter value, use the knob to directly change the value of
the pulse width in parameter 1 of Figure 5-7; or use the numeric keypad to enter the
value, then select the desired unit from the right menu, press the desired unit (ks, s,
ms, us, ns) or Enter the value; press the X soft key to delete the last digit, press the
← soft key to cancel the input, and press the Enter soft key to indicate the default
input.
Set the duty cycle parameter value, use the knob to directly change the value of the
graph duty cycle; or use the numeric keypad to enter the value, then press % or
Enter from the right menu to enter the demand value; press the X soft key to delete
the last one. Bit, press the ← soft key to cancel the input, press the Enter soft key
to indicate the default input.
Figure 4- 7: Set the pulse width