Instructions
Table Of Contents
- 1.General Safety Requirement
- 2.Safety Terms and Symbols
- 3.Quick start
- 4.Panel Operation
- Channel Setting
- Waveform Setting
- Output the modulated waves
- Hexadecimal frequency shift keying (3FSK)
- Quaternary frequency shift keying (4FSK)
- Binary phase shift keying (BPSK)
- Oscillating keying (OSK)
- Output the sweep frequency (Sweep)
- Output the burst (Burst)
- Counter
- Utility function setting
- Edit the Arbitrary Wave (Edit)
- File system (Store)
- Save/recall instrument settings (Preset)
- Use build-in help (Help)
- 5.Communicate with PC
- 6.Troubleshooting
- 7.Specification
- 8.Appendix
4
.
Panel Operation
19
Figure 4- 8: noise wave user interface
Output Arbitrary Wave
Press , the screen displays the user interface of the arbitrary wave. By
operating the arbitrary wave menu on the right side of the screen, the output
waveform parameters of the arbitrary wave can be set.
Arbitrary wave menus include: frequency/period, amplitude/high level, offset/low
level, start phase, built-in waveform.
For the setting frequency/period, amplitude/high level, offset/low level, and starting
phase, please refer to Output Sine Wave on page 10.
Arbitrary waves include two kinds of arbitrary waveforms: system built-in waveforms
and user-edited waveforms.