Instructions

4
.
Panel Operation
49
Screen Saver
If there is no operation during the set screen saver time, the screen enters the
protection mode (the screen display is turned off, that is, the black screen). Press any
key to redisplay the operation interface.
(1) Press the Utility softkey, select Display Settings, and press the Screen Saver
softkey to select the On/Off screen saver.
(2) When the screen saver is turned on, the screen saver time can be set. Turn the
knob to change the current cursor position value, press the / arrow key
to move the cursor left or right, or use the numeric keypad to enter the time in
minutes, and the screen saver time range is 1 to 999 minutes.
Separator
The user can set the separator of the screen display data.
(1) Press the Utility softkey, select Display Settings, and press the Delimiter
softkey.
(2)
Press the Separator softkey to toggle between commas, spaces, and none.
Taking the frequency parameter as an example:
Comma
Space
None
Date
(1)
Press the Utility softkey, select Display Settings, and then press the Date softkey
to select Date.
(2)
Turn the knob to change the current cursor position value, press the /
arrow key to move the cursor left or right.
CH1/2 Settings
Synchronize
Our instruments can output basic waveforms (except noise), arbitrary waveforms
(except DC), harmonics, sweep waveforms, burst waveforms, and synchronized
waveforms of modulated waveforms from a single channel or simultaneously from