Instructions

4
.
Panel Operation
52
other three nnn ranges from 0 to 255. It is recommended to ask your
network administrator for an available IP address.

Press Gateway and select Gateway. Use the numeric keypad and knob keys
to enter the desired gateway address. The default gateway format is
nnn.nnn.nnn.nnn. The first nnn ranges from 1 to 223 (except 127), and the
other three nnn ranges from 0 to 255. It is recommended to consult your
network administrator for an available IP address.
 Press the Subnet Mask softkey to select the subnet mask. Use the numeric
keypad and knob keys to enter the desired subnet mask address. The
default gateway format is nnn.nnn.nnn.nnn. Where nnn ranges from 0 to
255. It is recommended to ask your network administrator for an available
IP address.

Press Port to select the port. Use the numeric keypad and knob keys to
enter the desired port value, which ranges from 0001 to 4000.
System Setting
Select the language
Press the Utility function key to select System Settings and press the Language
softkey to switch the display language.
Buzzer
Press the Utility function button, select System Settings, and press the beep soft key
to select the “on” or “off” buzzer.
Clock source
An internal clock source is provided, an external clock source from the [10MHz In/Out/Counter]
input on the rear panel is also accepted, and a clock source can be output from the [Ref Clk Out]
connector for use by other devices.
Warning:
The amplitude of the [10MHz In/Out/Counter] input signal must be above 1 V.
Press the Utility function key, select System Settings, press the Clock Source softkey to select the