Instructions
Table Of Contents
- 1.General Safety Requirement
- 2.Safety Terms and Symbols
- 3.Quick start
- 4.Panel Operation
- Channel Setting
- Waveform Setting
- Output the modulated waves
- Hexadecimal frequency shift keying (3FSK)
- Quaternary frequency shift keying (4FSK)
- Binary phase shift keying (BPSK)
- Oscillating keying (OSK)
- Output the sweep frequency (Sweep)
- Output the burst (Burst)
- Counter
- Utility function setting
- Edit the Arbitrary Wave (Edit)
- File system (Store)
- Save/recall instrument settings (Preset)
- Use build-in help (Help)
- 5.Communicate with PC
- 6.Troubleshooting
- 7.Specification
- 8.Appendix
3
.
Quick start
3
3. Quick start
Front panel
Figure 3- 1 Front Panel overview
1
Display Area
Display user interface (8-inch capacitive touch screen)
2
Menu Selection
Button
Includes 6 buttons to select the corresponding menu softkey
3
Mode Button
Area
Modulation (Mod): Output modulation waveform
Sweep: Scan a sine wave, square wave, ramp wave or
arbitrary wave
Burst: A burst that produces a sine wave, square wave, ramp
wave, pulse wave, or arbitrary wave.
4
Knob
Change the currently selected value, also used to select the
character in the soft keyboard when the file location or file
name is entered.
5
Direction Button
Move the cursor of the selected parameter
6
Function Button
Area
Counter: Enter the frequency meter interface
Wave Edit (Edit): enter the waveform editing interface
Preset: Enter the preset menu, set the reset parameters or