Instructions
Table Of Contents
- 1.General Safety Requirement
- 2.Safety Terms and Symbols
- 3.Quick start
- 4.Panel Operation
- Channel Setting
- Waveform Setting
- Output the modulated waves
- Hexadecimal frequency shift keying (3FSK)
- Quaternary frequency shift keying (4FSK)
- Binary phase shift keying (BPSK)
- Oscillating keying (OSK)
- Output the sweep frequency (Sweep)
- Output the burst (Burst)
- Counter
- Utility function setting
- Edit the Arbitrary Wave (Edit)
- File system (Store)
- Save/recall instrument settings (Preset)
- Use build-in help (Help)
- 5.Communicate with PC
- 6.Troubleshooting
- 7.Specification
- 8.Appendix
7
.
Specification
68
Duty cycle
0.3% to 99.7%
Rise and fall time
≥7ns
Overshoot
< 3%
Jitter
300ps + 100ppm
Noise
Types
Gaussian white noise
Bandwidth (-3dB)
120M
Arbiratry wave
Bandwidth
120M
Waveform length
2 to 1M points
Sampling rate
< = 312M (at frequency <25kHz)
1.25G (at frequency >=25kHz)
Amplitude accuracy
14 bits
Minimum rise and fall time
< 7 ns
Jitter
3 ns
Harmonic wave
Harmonic number
≤16
Frequency Range
1μHz to 100MHz
Harmonic type
Odd, even, sequential, custom
Harmonic amplitude
Each harmonic amplitude can be set
Harmonic phase
Each harmonic phase can be set
Modulated Waves
AM
Carrier
Sine wave, square wave, ramp wave, arbitrary wave
Modulated signal
source
Internal or external
Internal modulation
waveform
Sine wave, square wave, ramp wave, white noise, arbitrary
waveform
Internal amplitude
modulation frequency
2 mHz to 100 kHz
Depth
0.0% to 100.0%
FM
Carrier
Sine wave, square wave, ramp wave, arbitrary wave
Modulated signal
source
Internal or external
Internal modulation
waveform
Sine, square, ramp, white noise, and arbitrary waveforms
Internal modulation
frequency
2 mHz to 100 kHz