Instructions
Table Of Contents
- 1.General Safety Requirement
- 2.Safety Terms and Symbols
- 3.Quick start
- 4.Panel Operation
- Channel Setting
- Waveform Setting
- Output the modulated waves
- Hexadecimal frequency shift keying (3FSK)
- Quaternary frequency shift keying (4FSK)
- Binary phase shift keying (BPSK)
- Oscillating keying (OSK)
- Output the sweep frequency (Sweep)
- Output the burst (Burst)
- Counter
- Utility function setting
- Edit the Arbitrary Wave (Edit)
- File system (Store)
- Save/recall instrument settings (Preset)
- Use build-in help (Help)
- 5.Communicate with PC
- 6.Troubleshooting
- 7.Specification
- 8.Appendix
7
.
Specification
69
Frequency offset
2 mHz ≤ offset ≤ min (carrier frequency, carrier maximum
frequency - carrier frequency) by default, the smaller of the
two
PM
Carrier
Sine wave, square wave, ramp wave, arbitrary wave
Modulated signal
source
Internal or external
Internal modulation
waveform
Sine, square, ramp, white noise, and arbitrary waveforms
Internal phase
modulation frequency
2 mHz to 100 kHz
Phase deviation range
0°～180°
PWM
Carrier
Pulse wave
Modulated signal
source
Internal or external
Internal modulation
waveform
Sine, square, ramp, white noise, and arbitrary waveforms
Internal phase
modulation frequency
2 mHz to 100 kHz
Offset
0 to min (min is the smaller value of pulse wave duty cycle
and 100%-pulse wave duty cycle)
FSK
Carrier
Sine wave, square wave, ramp wave, arbitrary wave
Modulated signal
source
internal
Internal modulation
waveform
50% square wave
FSK frequency
2 mHz to 1MHz
3FSK
Carrier
Sine wave, square wave, ramp wave, arbitrary wave
Modulated signal
source
internal
Internal modulation
waveform
50% square wave
FSK frequency
2 mHz to 1MHz
4FSK
Carrier
Sine wave, square wave, ramp wave, arbitrary wave
Modulated signal
source
internal
Internal modulation
waveform
50% square wave
PSK