Instructions
Table Of Contents
- 1.General Safety Requirement
- 2.Safety Terms and Symbols
- 3.Quick start
- 4.Panel Operation
- Channel Setting
- Waveform Setting
- Output the modulated waves
- Hexadecimal frequency shift keying (3FSK)
- Quaternary frequency shift keying (4FSK)
- Binary phase shift keying (BPSK)
- Oscillating keying (OSK)
- Output the sweep frequency (Sweep)
- Output the burst (Burst)
- Counter
- Utility function setting
- Edit the Arbitrary Wave (Edit)
- File system (Store)
- Save/recall instrument settings (Preset)
- Use build-in help (Help)
- 5.Communicate with PC
- 6.Troubleshooting
- 7.Specification
- 8.Appendix
7
.
Specification
70
Carrier
Sine wave, square wave, ramp wave, arbitrary wave
Modulated signal
source
Internal or external
Internal modulation
waveform
50% square wave
PSK frequency
2 mHz to 1MHz
ASK
Carrier
Sine wave, square wave, ramp wave, arbitrary wave
Modulated signal
source
Internal or external
Internal modulation
waveform
50% square wave
ASK frequency
2 mHz to 1MHz
BPSK
Carrier
Sine wave, square wave, ramp wave, arbitrary wave
Modulated signal
source
internal
Internal modulation
waveform
50% square wave
BPSK frequency
2 mHz to 1MHz
OSK
Carrier
Sine wave
Modulated signal
source
internal
Internal modulation
waveform
50% square wave
Oscillation time
8ns to 499.75μs
OSK frequency
2 mHz to 1MHz
Sweep
Carrier
Sine, rectangular wave, ramp wave, arbitrary wave
Minimum/maximum
starting frequency
1uHz
Maximum/termination
frequency
Sine wave: 200MHz
Square wave: 50MHz
Ramp wave: 5MHz
Arbitrary wave: 15MHz (built-in waveform) or 50MHz
(user-defined waveform)
Types
Linear, logarithmic
Sweep direction
Up / Down
Sweep time
1 ms to 500 s ± 0.1%
Trigger source
Internal, external, manual
Burst